Masterflex P/S Precision Peristaltic Pump System

Masterflex, L/S, Precision, Peristaltic Pump, System

Masterflex P/S Precision Console Drives

Deliver flow rates from 0.06 to 3400 mL/min (up to 54 GPH) with Masterflex P/S pump heads
Motor and controller in one convenient package
Molded handle for one-handed portability
Precise reset of speed control with lockable 10-turn potentiometer and separate on/off
Reversible motor
4 to 20 mA remote speed control, START/STOP via open collector or contact closure
Speed not affected by minor variations in power line voltage (VAC) and frequency (Hz)
0 to 3400 ml/min (0 to 54 GPH) with High Performance pump head.

Masterflex P/S High-Pressure Pump Systems

Same features as precision drives 965-1500 and 965-1505
Feed chemicals continuously at up to 100 psi
Convenient package comes complete with motor, High Performance pump head, and 10 feet of PharmMed® high-pressure pump tubing
Norprene® high-pressure tubing also available for these pumps (see pump section to order)

Specifications:
Flow Rate :	0.36 to 2900 mL/min (0.005 to 46 GPH)
Reversible :	Yes
External Control-Input :	4 to 20 mA, 2 to 10 V, TTL, signal for remote stop
External Control-Output :	Not Applicable
Motor Type :	Continuous duty, totally enclose, non-ventilating, permanent magnet DC; permanent lubrication bearings
Speed Control Type :	10-turn potentiometer, SCR, 100:1 turndown
Speed Regulation (Repeatability) :	1% (10-turn potentiometer settable to 1%)
Operating Temperature :	0 to 40°C (32 to 104°F)
Storage Temperature :	-45 to 65°C (-49 to 149°F)
IP Rating :	IP23
Agency Approvals :	UL, cUL, CE (230 V units)
Dimensions (L x W x H) :	29.2 cm x 20.3 cm x 18.4 cm (8" x 7.25") (11.5" x 8.0" x 7.25" without pump)